all right we’re going to the artillery office say I 167 here’s the artillery jam-pack I have it flipped on its surface well that’s easiest super simple all you need is a Torx t1 5 bit looks like that and easy do it by hand until I feel that it’s in the socket correctly and use my wrench shouldn’t be too tight yeah do that four times to in the middle formerly on the top previously in the bottom all right it only realized that the top and bottom bolts are quite deep so you’re gonna need a long T 15 I “ve been thinking about” a three or four-inch like that otherwise that’s not a problem so simply slide it up like this there’s no front and rear they both can go either way and there you go ready for testing or replacing obviously facility opposite of removal time don’t over tighten them don’t want to strip anything just make it nice and snug